112-3854
1. Pull tow bypass levers
rearward and then out to
lock into place.
2. Push the machine.
112-3855
1. Height of cut—mm
3. Locking pin location.
2. Locked position
112-3856
1. Warning—read the
Operator’s Manual
for more information.
2. Poison hazard; caustic liquid/chemical burn hazard—keep
children away from the battery.
3. Explosion hazard—no re, open ames, or smoking; avoid
sparks.
112-3857
1. Warning—read the
Operator’s Manual
.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
112-3858
1. Read the
Operator’s
Manual
.
3. Remove the ignition key
before adjusting the height
of cut.
2. Read the instructions before
servicing or performing
maintenance.
4. Height of cut settings.
Manufacturer’s Mark
1. Indicates the blade is identied as a part from the original
machine manufacturer.
10
Summary of Contents for Z334 Z-Master
Page 8: ...Slope Chart 8 ...
Page 44: ...Figure 53 1 Keep the end of the bolt ush with the nut 3 Nut 2 Rear pivot bracket 4 Bolt 44 ...
Page 54: ......
Page 55: ......