Starting and Stopping the
Engine
Starting the Engine
1.
Raise the ROPS up and lock into place, sit on the seat
and fasten the seat belt.
2.
Move the motion controls to neutral locked position.
3.
Set the parking brake; refer to Setting the Parking
Brake.
4.
Move the blade control switch (PTO) to the Off
position (Figure 19).
5.
Move the throttle lever midway between the Slow and
Fast positions.
g017006
Figure 19
6.
Turn the ignition key to the Start position (Figure 17).
When the engines starts, release the key.
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
Figure 20
1.
Off
3.
Start
2.
Run
19
Summary of Contents for Z Master Professional 6000 Series
Page 11: ...109 7069 11...
