WARNING
A blade that is bent or damaged could
break apart and could seriously injure or
kill you or bystanders.
•
Always replace bent or damaged
blade with a new blade.
•
Never file or create sharp notches in
the edges or surfaces of blade.
Removing the Blades
Blades must be replaced if a solid object is hit, if the
blade is out of balance or is bent. To ensure optimum
performance and continued safety conformance of
the machine, use genuine Toro replacement blades.
Replacement blades made by other manufacturers
may result in non-conformance with safety standards.
1.
Hold the blade end using a rag or thickly-padded
glove.
2.
Remove the blade bolt, curved washer, and
blade from the spindle shaft (
g004536
Figure 96
1.
Sail area of blade
3.
Curved washer
2.
Blade
4.
Blade bolt
64
