![Toro Z-320 Operator'S Manual Download Page 21](http://html1.mh-extra.com/html/toro/z-320/z-320_operators-manual_1132667021.webp)
Operation
19
Pushing the Machine by Hand
IMPORTANT: Always push the machine by
hand. Never tow the machine because
hydraulic damage may occur.
To Push the Machine
1.
Disengage the power take off (PTO) and turn the
ignition key to “OFF” to stop the engine.
2.
Rotate pump by-pass valves counterclockwise 2
turns to push. This allows hydraulic fluid to
by-pass the pump enabling the wheels to turn
(Fig. 12).
IMPORTANT: Rotate by-pass valve a
maximum of 2 turns so the valve does not
come out of the body causing fluid to run out.
3.
Release the parking brake.
To Operate the Machine
1.
Turn the by-pass valves in to operate (Fig. 12).
Note:
The machine will not drive unless
by-pass valves are turned in.
1
m–3305
Figure 12
1.
By-pass valve
Summary of Contents for Z-320
Page 7: ...Safety 5 Slope Chart Read all safety instructions on pages 2 4 ...
Page 38: ...Maintenance 36 Wiring Diagram ...
Page 43: ......