Greasing the Front Wheel
Bearings
Service Interval:
Every 300 hours
Grease specification:
Mobilgrease XHP™-222
Removing the Hub and Rotor
1.
Lift the front of the machine and support it with jack
stands.
2.
Remove the 5 lug nuts that secure the wheel to the hub
(
).
Figure 30
1.
Lug nut
3.
Hub
2.
Wheel
3.
Remove the flange-head bolts (3/8 x 1 inch) that secure
the bracket for the brake assembly to the spindle and
separate the brake from the spindle (
).
Note:
Support the brake assembly before proceeding
to the next step.
Figure 31
1.
Caliper bracket (brake
assembly)
3.
Flange-head bolts (3/8 x
1 inch)
2.
Spindle
4.
Remove the dust cap from the hub (
Figure 32
1.
Dust cap
4.
Tab washer
2.
Nut retainer
5.
Spindle
3.
Spindle nut
6.
Cotter pin
5.
Remove the cotter pin and hut retainer from the
spindle and spindle nut (
6.
Remove the spindle nut from the spindle, and separate
the hub and rotor assembly from the spindle (
and
).
30
