15
6
2
4
3
3
5
1
1567
Figure 22
1.
Rod handle
2.
Lift arm
3.
Welded washers
4.
Bracket
5.
Lift assist spring
6.
Rod hook
10. Unhook the lift assist spring from between the welded
washers on the rod (Fig. 22).
11. Slide the rod handle out of hole in the tractor lift arm
(Fig. 22).
12. Unhook the lift assist spring from the slot in the
mounting bracket under the left fender (Fig. 22).
13. Remove the hairpin cotter, clevis pin, and retainer to
disconnect the lift rod from the V-notch in the
attachment lift (Fig. 23).
14. Remove the lift rod (and any optional spacer washers)
from the lift tube (Fig. 23).
1568
1
5
2
4
6
3
Figure 23
1.
Lift rod
2.
Optional spacer washer
3.
Lift tube
4.
V- notch
5.
Retainer
6.
Hairpin cotter
15. Open the front hitch lock (Fig. 24) and remove the
snowthrower mounting frame from the front hitch.
2
1248
1
3
Figure 24
1.
Lock
2.
Mounting frame
3.
Front hitch
16. Remove the hairpin cotter and washer to disconnect the
lift tube from the housing.
1288
3
2
1
Figure 25
1.
Lift tube
2.
Washer
3.
Hairpin cotter
Note: Save all hardware for use when installing the
snowthrower.
