Set-Up Instructions
7
Check Traction Control Pedal
After adjusting the hydro neutral position it is
necessary to check the traction control pedal travel.
While pressing the control pedal full forward and full
reverse it must not contact the footrest pad before
hitting the stop(s) at the transaxle (Fig. 8).
1.
If contact is made with the foot pad in either
direction, forward or reverse, adjustment is
required.
2.
Loosen the capscrews below the right footrest.
Slide the pedal in the slots away from the
direction that made contact with the footrest
(Fig. 9).
3.
Tighten capscrews and recheck traction control
pedal for contact with footrest.
1
2
Figure 9
1.
Traction control pedal
2.
Adjusting capscrews
Test Drive the Tractor
Make sure all electrical and mechanical systems are
operating properly.
