Installing the Wire Harness to the
Battery
1.
Route the harness to the left from the side
console to the flasher module.
2.
Route the harness leg with the ring terminal to
the positive post of the battery (
).
g036958
Figure 10
1.
Ring terminal
2.
Positive (+) battery post
4
Installing the Lift-Manifold
Bracket and Cover
Parts needed for this procedure:
1
Lift-manifold bracket
1
Electronic controller cover
Procedure
1.
Remove the nuts and bolts that secure the
mounting bracket to the lift-cylinder manifold and
the mount plate (
Retain and set aside the nuts and bolts.
g208941
Figure 11
1.
Bolt
3.
Mounting bracket
2.
Nut
2.
Use the previously removed nuts and bolts to
secure the lift-manifold bracket to the mount
plate (
g208940
Figure 12
1.
Bolt
3.
Nut
2.
Lift-manifold bracket
3.
Torque the nuts to 1978 to 2542 N∙cm (175 to
225 in-lb).
4.
Secure the new lift-cylinder manifold to the
lift-manifold bracket; refer to the
Installation
Instructions
for the ultra sonic boom leveling kit.
6
Summary of Contents for Ultra Sonic Boom 130-8227
Page 8: ......
