Routing the Wire Harness to the Front of the Machine
Route the wire harness from the rear of the machine to the console as shown in
g208589
Figure 4
1.
Wire harness
Installing the Switches
1.
Route the 8-socket connectors through the
console (
2.
Install the ultra sonic-mode switch and the
boom-lift switches; refer to the
Installation
Instructions
for the ultra sonic boom leveling kit.
g210252
Figure 5
1.
8-socket connector—ultra
sonic-mode switch
2.
8–socket
connector—boom-lift
switch
4
Summary of Contents for Ultra Sonic Boom 130-8227
Page 8: ......
