Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Change the engine oil without the oil filter.
• Service the blade-drive system.
Before each use or daily
• Check the engine-oil level and add oil as needed.
• Check the blade-stop system operation. The blades should stop within 3 seconds of
releasing the control bar; if they do not, contact an Authorized Service Dealer.
• Clean under the machine housing.
• Inspect the air filter.
• Check the blades and service them, if necessary.
• Inspect the blades.
• Check the parking-brake function.
Every 25 hours
• Clean the foam pre-cleaner (more frequently in dusty conditions).
Every 40 hours
• Clean the wheels and gears.
Every 50 hours
• Change the engine oil (more often in dusty conditions).
• Check the condition of the belts.
• Check the fuel hose and replace it if necessary.
• Remove debris from under the belt cover.
• Service the blade-drive system.
Every 100 hours
• Change the oil filter.
• Check the spark plug.
• Clean the fuel-tank filter.
• Change the fuel filter.
Every 250 hours
• Change the blade-brake-clutch belt.
• Change the transmission belt.
Every 300 hours
• Replace the paper air filter (more frequently in dusty conditions).
Yearly or before storage
• Empty the fuel tank before repairs as director or before storage.
Important:
Refer to your engine owner’s manual for additional maintenance procedures.
Maintenance Safety
•
Disconnect the spark-plug wire from the spark plug before performing any maintenance procedure.
•
Wear gloves and eye protection when servicing the machine.
•
The blade is sharp; contacting the blade can result in serious personal injury. Wear gloves when servicing
the blade. Do not repair or alter the blade(s).
•
Never tamper with safety devices. Check their proper operation regularly.
•
Tipping the machine may cause the fuel to leak. Fuel is flammable and explosive, and can cause personal
injury. Run the engine dry or remove the fuel with a hand pump; never siphon the fuel.
•
To ensure optimum performance of the machine, use only genuine Toro replacement parts and accessories.
Replacement parts and accessories made by other manufacturers could be dangerous, and such use
could void the product warranty.
21
Summary of Contents for TurfMaster HDX
Page 7: ...3 Assembling the Grass Bag No Parts Required Procedure g238450 Figure 5 7...
Page 37: ...Notes...
Page 38: ...Notes...
Page 40: ......
