Toro TRX-26 Operator'S Manual Download Page 52

Conditions and Products Covered

The Toro® Company and its affi liate, Toro Warranty Company, pursuant 
to an agreement between them, jointly warrant your Toro Compact Utility 
Equipment (“Product”) to be free from defects in materials or workmanship. 
The following time periods apply from the date of purchase:

Products Warranty 

Period 

Loaders, Trenchers and 

1 year or 1000 operating

Attachments 

hours, whichever occurs  

 

fi rst

Kohler Engines 

3 years

All other Engines  

2 years

Where a warrantable condition exists, we will repair the Product at no cost 
to you including diagnosis, labor, and parts.

Instructions for Obtaining Warranty Service

If you think that your Toro Product contains a defect in materials or work-
manship, follow this procedure:

1. Contact any Authorized Toro Compact Utility Equipment (CUE) Service 

Dealer to arrange service at their dealership. To locate a dealer conve-
nient to you, access our website at www.Toro.com. You may also call our 
Toro Customer Care Department toll free at 888-865-5676 (U.S. custom-
ers) or 888-865-5691 (Canadian customers).

2. Bring the product and your proof of purchase (sales receipt) to the 

Service Dealer.

If for any reason you are dissatisfi ed with the Service Dealer’s analysis or 

with the assistance provided, contact us at: 

LCB Customer Service Department
Toro Warranty Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Toll Free: 888-865-5676 (U.S. customers)
Toll Free: 888-865-5691 (Canada customers)

Owner Responsibilities

You must maintain your Toro Product by following the maintenance pro-
cedures described in the 

Operator’s Manual

. Such routine maintenance, 

whether performed by a dealer or by you, is at your expense. Parts sched-
uled for replacement as required maintenance (“Maintenance Parts”), are 
warranted for the period of time up to the scheduled replacement time for 
that part. Failure to perform required maintenance and adjustments can be 
grounds for disallowing a warranty claim. 

Items and Conditions Not Covered

Not all product failures or malfunctions that occur during the warranty pe-
riod are defects in materials or workmanship. This express warranty does 
not cover the following:

Product failures which result from the use of non-Toro replacement 
parts, or from installation and use of add-on, modifi ed, or unapproved 
accessories
Product failures which result from failure to perform required  mainte-
nance and/or adjustments
Product failures which result from operating the Product in an abusive, 
negligent or reckless manner
Parts subject to consumption through use unless found to be defec-
tive. Examples of parts which are consumed, or used up, during normal 
Product operation include, but are not limited to, digging teeth, tines, 
spark plugs, tires, tracks, fi lters, chains, etc.
Failures caused by outside infl uence. Items considered to be outside 
infl uence include, but are not limited to, weather, storage practices, 
contamination, use of unapproved coolants, lubricants, additives, or  
chemicals, etc.
Normal “wear and tear” items. Normal “wear and tear” includes, but is 
not limited to, worn painted surfaces, scratched decals or windows, etc
Any component covered by a separate manufacturer’s warranty
Pickup and delivery charges

General Conditions

Repair by an Authorized Toro Compact Utility Equipment (CUE) Service 
Dealer is your sole remedy under this warranty. 

Neither The Toro® 

Company nor Toro Warranty Company is liable for indirect, inciden-
tal or consequential damages in connection with the use of the Toro 
Products covered by this warranty, including any cost or expense of 
providing substitute equipment or service during reasonable periods 
of malfunction or non-use pending completion of repairs under this 
warranty. All implied warranties of merchantability and fi tness for 
use are limited to the duration of this express warranty. Some states 
do not allow exclusions of incidental or consequential damages, or 
limitations on how long an implied warranty lasts, so the above exclu-
sions and limitations may not apply to you

. This warranty gives you 

specifi c legal rights, and you may also have other rights which vary from 
state to state.

Except for the engine warranty coverage and the Emissions warranty refer-
enced below, if applicable, there is no other express warranty. 
The Emissions Control System on your Product may be covered by a sepa-
rate warranty meeting requirements established by the U.S. Environmental 
Protection Agency (EPA) or the California Air Resources Board (CARB). 
The hour limitations set forth above do not apply to the Emissions Control 
System Warranty. Refer to the California Emission Control Warranty State-
ment printed in you operator’s manual or contained in the engine manufac-
turer’s documentation for details.


Part Number 374-0198 Rev. A

CUE Products

A One-Year Limited Warranty

Toro Compact Utility Equipment Warranty

Countries Other than the United States or Canada

Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guaran-
tee policies for your country, province, or state. If for any reason you are dissatisfi ed with your Distributor’s service or have diffi culty obtaining guarantee 
information, contact the Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company.

Summary of Contents for TRX-26





















































Reviews: