10
Installing the Cross Brace
Parts needed for this procedure:
1
Cross brace
4
Hex-head bolt (5/16 x 7/8 inch)
4
Flange nut (5/16 inch)
Procedure
1.
Use 2 hex-head bolts (5/16 x 7/8 inch) and
flange nuts to secure the cross brace to the left
and right bagger support (
).
g276069
Figure 22
1.
Hex-head bolt (5/16 x 7/8
inch)
3.
Cross brace
2.
Flange nut (5/16 inch)
2.
Use 2 hex-head bolts (5/16 x 7/8 inch) and
flange nuts to secure the cross brace to the rear
guard (
).
g276070
Figure 23
1.
Flange nut (5/16 inch)
3.
Cross brace
2.
Hex-head bolt (5/16 x 7/8
inch)
17
