4.
Sit on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
FF
position, and move the motion-control levers
to N
EUTRAL
-
LOCK
position. Start the engine.
While the engine is running, center either
motion-control lever and move it forward or
reverse; the engine should shut off. Repeat for
other motion-control lever.
5.
Sit on the seat, disengage the parking brake,
move the blade-control switch (PTO) to the O
FF
position, and move the motion-control levers to
N
EUTRAL
-
LOCK
position. Try starting the engine;
the engine should not crank.
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable (
g027632
Figure 9
Adjusting the MyRide™
Suspension System
The MyRide™ suspension system adjusts to provide a
smooth and comfortable ride. You can adjust the rear
springs to quickly and easily change the suspension
system. Position the suspension system where you
are most comfortable (
and
The slots for the rear springs have detent positions for
reference. You can position the rear springs anywhere
in the slot, not just in the detent positions.
The following graphic shows the position for a soft or
firm ride and the different detent positions (
).
g195744
Figure 10
1.
Firmest position
3.
Detents in the slots
2.
Softest position
Note:
Ensure that the left and right springs are
always adjusted to the same positions.
16
