Mounting the Kit to the
Machine
1.
Install the rear mount assembly to the right side panel
on the machine using 2 bolts (3/8 x 7/8 inch) and 2
nuts (3/8 inch) as shown in
.
Note:
Use the 2 front holes if you are mounting a
curved trimmer.
g038084
Figure 5
1.
Bolt (3/8 x 7/8 inch)
3.
Nut (3/8 inch)
2.
Rear mount assembly
4.
Use these holes if you
are mounting a curved
trimmer.
2.
Install the front mount assembly over the frame, near
the right caster wheel, using the wide-flange nut (3/8
inch) and carriage bolt (3/8 x 3 inches) as shown in
g038085
Figure 6
1.
Wide-flange nut (3/8 inch)
3.
Carriage bolt (3/8 x 3
inches)
2.
Front mount assembly
4
