g017492
Figure 41
2.
To unfold the handle, refer to
Unfolding the Handle (page 5)
.
Remove the Machine from
Storage
1.
Check and tighten all fasteners.
2.
Remove the spark plug and spin the engine
rapidly by pulling the recoil-start handle to blow
the excess oil from the cylinder.
3.
Install the spark plug and tighten it with a torque
wrench to 20 N-m (15 ft-lb).
4.
Perform any maintenance procedures; refer to
Maintenance (page 16)
.
5.
Check the engine-oil level; refer to
Engine-Oil Level (page 9)
.
6.
Fill the fuel tank with fresh gasoline; refer to
Filling the Fuel Tank (page 9)
.
7.
Connect the wire to the spark plug.
21
Summary of Contents for Super Recycler 20382
Page 23: ...Notes ...
