Figure 14
Adjusting the Handle Height
You may raise or lower the handle to a position comfortable
for you.
1. Remove the lower handle knobs that attach the handle
brackets to the lower handle ends (Figure 15).
Figure 15
2. Insert the bolt through the hole in each of the handle
brackets that sets the handle to the desired position
(Figure 16).
Figure 16
1. Highest position
3. Lowest position
2. Middle position (either
hole)
3. Install the lower handle knobs and tighten the knobs as
tight as you can by hand (Figure 17).
Figure 17
Starting the Engine
1. Firmly push in the primer 3 times with your thumb,
holding the primer in for a second before releasing it
each time (Figure 18).
Figure 18
Note:
If the air temperature is below 55°F (13°C),
firmly push the primer in 5 times.
2. Pull the blade control bar to the handle (Figure 19).
Figure 19
3. Turn the ignition key (Figure 20) or pull the recoil start
handle (Figure 21).
Figure 20
8
Summary of Contents for Super Recycler 20062
Page 17: ......
