Toro Super Bagger 20192, Operator'S Manual, Page: 5 / 24

Setup
1. Unfolding the Handle
Procedure
1. Move the handle rearward and hold the upper handle
in place (Figure 3).
Figure 3
Note:
The handle will click into position.
2. Tighten the upper handle knob as tight as you can
(Figure 4).
Figure 4
2. Filling the Engine with Oil
0.58
quart
(0.55 l)
SAE 30 detergent oil with an API service classification
of SH, SJ, SL, or higher (not supplied with the mower).
Procedure
Important:
Your mower does not come with oil
in the engine.
1. Remove the dipstick (Figure 5).
Figure 5
2. Slowly pour oil into the oil fill tube, periodically
checking the level with the dipstick, until the dipstick
indicates that the engine is full as illustrated in
Figure 5.
Do not overfill. (Max. fill: 0.58 quart (0.55
l), type: SAE 30 detergent oil with an API service
classification of SH, SJ, SL, or higher.)
Note:
If you overfill the engine, pour some oil out
of it as directed in Changing the Engine Oil.
3. Install the dipstick securely.
Important:
Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
3. Install the Mulch Plug or
Grass Bag
Procedure
You must correctly install the mulch plug (for mulching
or side-discharging) or grass bag (for bagging) or
the
engine will not start .
The mower has a safety switch, located at the bottom
of a channel on the top, right rear of the mower, that
prevents the mower from operating without a mulch
plug or grass bag. This prevents the mower from
throwing debris at the operator through the rear chute.
5