g205385
Figure 1
Left side shown
1.
Drill holes—0.281 inch
3.
Left lower-panel assembly
2.
Foot platform
9.
Secure the left and right door cage assemblies
to the corresponding side of the machine.
Place the hinge assembly connected to each
door onto the previously installed door-mount
assemblies with 4 spacers.
10.
Use 4 ball studs and 4 flange nuts (5/16 inch) to
secure the springs to the door cage assemblies
and the spring mounts.
Note:
Install the springs with the cylinder end
on the door cage assembly and the piston end
on the spring mount.
3