Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item
Description
Faults
The Faults menu contains a list
of the recent machine faults.
Refer to the
Service Manual
or
contact your Toro Distributor
for more information on
the Faults menu and the
information contained there.
Service
The Service menu contains
information on the machine
such as hours of use, counters,
and other similar numbers.
Diagnostics
The Diagnostics menu
displays the state of each
machine switch, sensor, and
control output. You can use
this to troubleshoot certain
issues as it quickly tells you
which machine controls are on
and which are off.
Settings
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
About
The About menu lists the
model number, serial number,
and software version of your
machine.
Service
Menu Item
Description
Hours
Lists the total number of hours
that the machine, engine and
PTO have been on, as well
as the number of hours the
machine has been transported
and service due.
Counts
Lists numerous counts the
machine has experienced.
Diagnostics
Menu Item
Description
Cutting Units
Indicates the inputs, qualifiers,
and outputs for raising and
lowering the cutting units.
Hi/Low Range
Indicates the inputs, qualifiers,
and outputs for driving in
transport mode.
PTO
Indicates the inputs, qualifiers,
and outputs for enabling the
PTO circuit.
Engine Run
Indicates the inputs, qualifiers,
and outputs for starting the
engine.
Backlap
Indicates the inputs, qualifiers
and outputs for operating the
backlap function.
Settings
Menu Item
Description
Units
Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Language
Controls the language used
on the InfoCenter*.
LCD Backlight
Controls the brightness of the
LCD display.
LCD Contrast
Controls the contrast of the
LCD display.
Front Backlap Reel Speed
Controls the speed of the front
reels in backlap mode.
Rear Backlap Reel Speed
Controls the speed of the rear
reels in backlap mode.
Protected Menus
Allows the
superintendant/mechanic
to access protected menus by
inputting a passcode.
Blade Count
Controls the number of blades
on the reel for reel speed.
Mow Speed
Controls the ground speed for
determining the reel speed.
Height of cut (HOC)
Controls the height of cut
(HOC) for determining the reel
speed.
F Reel RPM
Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted.
R Reel RPM
Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted.
* Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced".
Titles are in the selected language, but menu items
are in English.
About
Menu Item
Description
Model
Lists the model number of the
machine.
SN
Lists the serial number of the
machine.
Machine Controller Revision
Lists the software revision of
the master controller.
21
