decal133-2930
133-2930
1.
Warning—do not operate this machine unless you are trained.
4.
Tipping hazard—drive slowly when turning; do not turn sharply
while traveling fast; only drive on slopes with the cutting units
lowered; always wear a seatbelt.
2.
Warning—wear hearing protection.
5.
Warning—do not park on slopes; engage the parking brake,
lower the cutting units, shut off the engine, and remove the
ignition key before leaving the machine.
3.
Thrown object hazard—keep bystanders away.
6.
Warning—read the
Operator's Manual
; do not tow the
machine.
decal133-2931
133-2931
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the
Operator’s Manual
as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions
on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on slopes can
cause the machine to become unstable.
1.
Warning—read the
Operator's Manual
; do not operate this
machine unless you are trained.
4.
Tipping hazard—do not drive across or down slopes greater
than 15°; only drive on slopes with the cutting units lowered;
always wear a seatbelt.
2.
Warning—wear hearing protection.
5.
Warning—do not park on slopes; engage the parking brake,
lower the cutting units, shut off the engine, and remove the
ignition key before leaving the machine.
3.
Thrown object hazard—keep bystanders away.
6.
Warning—read the
Operator's Manual
; do not tow the
machine.
8
