Toro Recycler 20960, Manual

Page: 13 / 96

•
Wet grass or leaves can cause serious injury if you slip and
contact the blade. Avoid mowing in wet conditions.
•
Use extreme care when approaching blind corners,
shrubs, trees, or other objects that may block your view.
•
Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could cause a slip-and-fall
accident.
•
Stop the machine and inspect the blades after striking an
object or if there is an abnormal vibration in the machine.
Make all necessary repairs before resuming operation.
•
Before leaving the operating position, shut off the engine,
and wait for all moving parts to stop.
•
If the engine has been running the muffler will be hot and
can severely burn you. Keep away from the hot muffler.
•
Check the grass catcher components and the discharge
guard frequently and replace them with the manufacturer’s
recommended parts when necessary.
•
Use accessories and attachments approved by the The
Toro® Company only.
Slope Safety
•
Mow across the face of slopes; never up and down. Use
extreme caution when changing direction on slopes.
•
Do not mow on excessively steep slopes. Poor footing
could cause a slip-and-fall accident.
•
Mow with caution near drop-offs, ditches, or
embankments.
Starting the Engine
1. Hold the blade-control bar against the handle ( Figure
17 ).
g009546
Figure 17
1. Blade-control bar
2. Pull the recoil-start handle ( Figure 18 ) lightly until
you feel resistance, then pull it sharply, and allow it to
return to the rope guide on the handle slowly.
g009548
Figure 18
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your hands
on the upper handle and your elbows at your sides, and the
machine will automatically keep pace with you (
Figure 19 ).
g009549
Figure 19
Note:
If the machine does not freely roll backward after
self-propelling, stop walking, hold your hands in place, and
allow the machine to roll a couple of centimeters (inches)
forward to disengage the wheel drive. You can also try
reaching just under the upper handle to the metal handle and
push the machine forward a couple of centimeters (inches).
If the machine still does not roll backward easily, contact an
Authorized Service Dealer.
11