manualshive.com logo in svg

Toro Recycler 20656, Operator'S Manual

Share
Download
Toro Recycler 20656 Operator'S Manual Download Page 4

4

3352-591

Product Overview

5

1

3

2

6

7

8

9

10

4

m-7308

1. Cutting height lever
2. Oil fill/Dipstick
3. Recoil start handle
4. Blade control bar
5. Ignition key

6. Fuel tank cap
7. Battery
8. Air filter
9. Primer
10. Spark plug

m-5630/m-5637/m-5587

2

1

3

4

1. Grass bag
2. Side discharge chute
3. Battery charger

4. Rear discharge plug

(installed)

Setup

Important

: Remove and discard the protective plastic

sheet that covers the engine.

Unfolding the Handle

Folding or unfolding the handle improperly can

damage the cables, causing an unsafe operating

condition.

S

Do not damage the cables when folding or

unfolding the handle.

S

If a cable is damaged, contact an Authorized

Service Dealer.

1.

Carefully move the upper handle forward until the

handle halves are in line and nest together as shown.

m-7309

2.

Tighten the handle

knobs.

m-6289

3.

Rotate the handle rearward (as shown) until it

clicks into place.

m-7309

Summary of Contents for Recycler 20656

















Reviews:

No comments

Brands by name

Popular brands

Load more brands