Toro Recycler 20656 Operator'S Manual Download Page 3

3

3352-591

Replace a faulty muffler.

Do not change the engine governor setting or

overspeed the engine.

Sound Pressure

This unit has a maximum sound pressure level at the

operator’s ear of 85 dBA, based on measurements of

identical machines per Directive 98/37/EC.

Sound Power

This unit has a guaranteed sound power level of

98 dBA, based on measurements of identical

machines per Directive 2000/14/EC.

Vibration

This unit does not exceed a hand/arm vibration level

of 4.5 m/s

2

, based on measurements of identical

machines per Directive 98/37/EC.

Safety/Instruction Decals

Important

: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.

94-8072

104-7908

1. Warning—do not operate the mower without the rear discharge

plug or bag in place; do not operate the mower without the side

discharge cover or deflector in place.

104-7909

1. Warning—read the 

Operator’s Manual.

2. Thrown object hazard—keep bystanders a safe distance from

the machine.

3. Thrown object hazard, mower—keep the deflector in place.
4. Cutting/dismemberment hazard of hand or foot, mower

blade—stay away from moving parts.

5. Cutting/dismemberment hazard of hand or foot, mower

blade—do not operate up and down slopes; operate side to side

on slopes; stop the engine before leaving the operating position;

and look behind you when backing.

104-7953

1. Warning
2. Read the 

Operator’s Manual

 for information on charging the

battery.

3. Contains lead; do not discard.

108-4791

Summary of Contents for Recycler 20656

















Reviews: