Toro Recycler 20351, Dealer Manual

Page: 45 / 57

Service Dealer’s Guide to Great Quality of Cut 6 - 1
Kits to Improve Quality of Cut
This section describes special kits developed to help
resolve various quality of cut issues.
Toro Recycler Mulch Plug
Model 59134 fits Toro 21-inch Recycler Steel Decks
Model 59135 fits Toro 21-inch Super Recycler Cast
Aluminum Decks
These plugs smooth the surface under the deck while
adding an additional deflector. They fit in the bagging
chute and prevent grass accumulation in that space.
Washout Port Kit
P/N 95-3282
This kit (Figure 76) allows an operator to attach a
garden hose to the deck and circulate water under the
deck by engaging the blade while the water is running.
This prevents grass buildup under the deck.
Figure 76
washout.TIF
If the underside of the deck is not cleaned after
mowing, the accumulated grass can dry out and bond
to the deck. Once this happens, the hard material must
be scraped from under the deck. This often removes
the protective paint from under the deck.
With a washout port kit, it is easy to hook up a garden
hose and clean the cutting chamber after each use.
Many models currently have this kit factory installed.
However, it can be used on most models by finding a
place where the water can run into the cutting chamber
and not hit a kicker or other object.
Cast Deck Height of Cut
Notch Repair Kits
P/N 105-1290 (Figure 77) fits 21-inch (35cm) Super
Recyclers built 1995 and newer.
Figure 77
mvc-460.tif
P/N 49-4080 (Figure 78) fits 21-inch (35cm) Rear
baggers and Recyclers 1978 through 1994.
Figure 78
2001-065.TIF
These kits are used to repair cast decks with worn
height of cut notches. The kits allow the operator to
avoid replacing the deck.
Note: These kits do not fit Vacu-Power, Landscaper, or
commercial walk behind mowers.
1. Washout fitting
2.
Coupling
3. Hose