Safety and Instructional Decals
Important:
Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Manufacturer's Mark
1.
Indicates the blade is identified as a part from the original
machine manufacturer.
94-8072
112-8867
1.
Lock
2.
Unlock
114-7982
1.
Warning—read the
Operator's Manual
.
2.
Thrown object hazard—keep bystanders a safe distance
from the machine.
3.
Cutting/dismemberment hazard of hand or foot, mower
blade—remove the ignition key and read the instructions
before servicing or performing maintenance.
4.
Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts.
5.
Cutting/dismemberment hazard of hand or foot, mower
blade—do not operate up and down slopes; operate side to
side on slopes; stop the engine before leaving the operating
position; and look behind you when backing up.
Setup
Important:
Remove and discard the protective plastic
sheet that covers the engine.
1
Installing the Handle
No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
•
Do not damage the cables when folding or
unfolding the handle.
•
If a cable is damaged, contact an Authorized
Service Dealer.
1.
Remove the handle knobs from the mower housing
(Figure 3).
Important:
Route the cables to the outside of the
handle knobs as you install the handle.
Figure 3
2.
Move the handle to the operating position.
3.
Install and tighten the handle knobs that you removed
in step 1 .
4
