Toro ProLine 30167, Operator'S Manual

Page: 29 / 42

Maintenance
25
Change Oil Filter
Service Interval/Specification
Replace the oil filter every 200 hours or every other
oil change.
Note: Change oil filter more frequently when
operating conditions are extremely
dusty or sandy.
1. Drain the oil from the engine; refer to
Changing/Draining Oil, page 24.
2. Remove the old filter and wipe the filter adapter
(Fig. 22) gasket surface.
3. Apply a thin coat of new oil to the rubber gasket
on the replacement filter (Fig. 22).
m–1256
1
2
3
Figure 22
1. Oil filter
2. Gasket
3. Adapter
4. Install the replacement oil filter to the filter
adapter. Turn the oil filter clockwise until the
rubber gasket contacts the filter adapter, then
tighten the filter an additional 3/4 turn (Fig. 22).
5. Fill the crankcase with the proper type of new
oil; refer to Changing/Draining Oil, page 24.