Toro ProLine 139-7860, Installation Instructions Manual

Page: 2 / 12

Installation
Note:
Determine the left and right sides of the
machine from the normal operating position.
1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Disengage the PTO and engage the parking
brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
2
Assembling the Bagger
Parts needed for this procedure:
1 Back plate
1 Support
1 Mounting bracket
7 Bolt (1/4 x 5/8 inch)
7
Locknut (1/4 inch)
1 Clamp
1 Bolt (3/8 x 3/4 inch)
1 Locknut (3/8 inch)
1 Left latch
1 Right latch
4 Phillips-head screw
4 Locknut (#10)
4 Lock washer
Procedure
1. Install the support on the back plate using 4
bolts (1/4 x 5/8 inch) and 4 locknuts (1/4 inch);
Figure 1 .
g314767
Figure 1
1. Back plate 3. Support
2. Locknuts (1/4 inch) 4. Bolts (1/4 x 5/8 inch)
2. Install the mounting bracket to the back plate
with 3 bolts (1/4 x 5/8 inch) and 3 locknuts (1/4
inch);
Figure 2 .
Note:
For 36-inch and 48-inch decks, an
adapter kit is needed. Order Part no. 121-7515.
g314768
Figure 2
1. Bolts (1/4 x 5/8 inch) 3. Back plate
2. Mounting bracket 4. Locknuts (1/4 inch)
3. Install the clamp to the bagger and adapter with
a bolt (3/8 x 3/4 inch) and locknut (3/8 inch);
Figure 3 .
2