Toro ProCore SR Series, Service Manual, Page: 34 / 122

ProCore SR Series Page 3 -- 16 Chassis
Covers (ProCore SR54, SR54--S, SR70 and SR70--S)
Figure 17
1. Rear hood
2. Cap screw (2 used)
3. Latch (2 used)
4. Cap screw (4 used)
5. RH screen
6. LH screen
7. Lock washer (6 used)
8. Foam strip (2 used)
9. Spacer (2 used per screen)
10. Cap screw (4 used)
11. Screen clip (2 used)
12. Flat washer (10 used)
13. Lock nut (4 used)
14. Cap screw (2 used)
15. Socket head screw (4 used)
16. Lock nut (4 used)
PROCORE SR54 SHOWN
FRONT
RIGHT
2
3
6
8
9
10
11
13
1
5
7
12
14
15
16
4
10
12
12
12
13
3
11
NOTE: The covers used on the ProCore SR54,
SR54--S, SR70 and SR70--S are very similar. The pro-
cedure for removal and installation of the covers is the
same on these models. The ProCore SR54 is shown in
Figure 17.