Toro Power Plex 51690, Operator'S Manual

Page: 5 / 12

Setup
Note:
The battery pack is not fully charged when you
purchase it. Before using the tool for the first time, refer to
Charging the Battery Pack (page 7) .
Mounting the Battery Charger
(Optional)
If desired, mount the battery charger securely on a wall using
the wall-mount key holes on the back of the charger.
Mount it indoors (such as a garage or other dry place), near a
power outlet, and out of the reach of children.
Refer to Figure 1 for assistance in mounting the charger.
Note:
Slide and twist the charger over the appropriately
positioned hardware to secure the charger in place (hardware
not included).
g194202
Figure 1
Assembling the Blower
1. Slide the blower tube onto the blower housing. You
may need to press down on the tab for the blower tube
to lock into place (
Figure 2 ).
g190102
Figure 2
1. Tab
2. Align the cavity on the battery pack with the tongue
in the handle housing, grasp the handle, and push the
battery pack into the handle until the latch locks into
place (
Figure 3 ).
g194149
Figure 3
1. Battery latch
5