Setup
Note:
The battery pack is not fully charged when it
is purchased. Before using the tool for the first time,
refer to
Charging the Battery Pack (page 9)
.
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to
for assistance in mounting the
charger.
Note:
Slide and twist the charger over the
appropriately positioned hardware to secure the
charger in place (hardware not included).
g194202
Figure 1
Product Overview
g204357
Figure 2
Left Side of Hedge Trimmer
1.
Blades
6.
Lock switch
2.
Guard
7.
Trigger
3.
Auxiliary-handle switch
8.
Battery latch
4.
Auxiliary handle
9.
Battery pack
5.
Handle-rotation button
10.
Protective cover
Specifications
Model
51491
51491T
Cutting
Length
610 mm
Rated
Voltage
40 VDC maximum, 36 VDC nominal usage
No-load
Speed
3000 spm at 40 VDC max
Cutting
width
18 mm
Charger
Type
88542
Battery Type
88540 (included with 51491), 88541 (sold
separately)
Appropriate Temperature Ranges
Charge the battery at
0°C (32°F) to 40°C (104°F)*
Use products at
-15°C (5°F) to 60°C (140°F)
Store products at
-15°C (5°F) to 60°C (140°F)
Unplug the charger if
Below 0°C (32°F) or above
40°C (104°F)
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
7
