operate the machine. Check the auger/impeller
cable; refer to
Auger/Impeller Cable (page 25)
and adjust it if
necessary. Otherwise, take the machine to an
Authorized Service Dealer for service.
WARNING
If the auger and impeller continue
to rotate when you release the
auger/impeller lever, you could seriously
injure yourself or others.
Do not operate the machine. Take it to an
Authorized Service Dealer for service.
Operating the Quick Stick®
Hold the blue trigger cap down to use the Quick Stick
to move the discharge chute and the chute deflector.
Release the trigger cap to lock the discharge chute
and chute deflector into position (
).
g001014
Figure 24
Moving the Discharge Chute
Hold the blue trigger cap down and move the Quick
Stick to the left to move the discharge chute to the
left; move the Quick Stick to the right to move the
discharge chute to the right (
g018894
Figure 25
•
If the chute does not move, refer to
Discharge-Chute Latch (page 27)
.
•
If the chute does not turn as far to the left as it
does to the right, ensure that the cable is routed to
the inside of the handles. Refer to
Upper Handle (page 9)
.
•
If the chute does not lock into place when you
release the trigger cap, refer to
Discharge-Chute Latch (page 27)
.
20
