B. Disconnect the trunnion from the speed selector
lever (Figure 11).
C. Turn the trunnion upward (counterclockwise) on
the speed control rod (Figure 11).
D. Connect the trunnion to the speed selector lever
(Figure 11).
7. If you made any adjustments, repeat this procedure
until no adjustments are required.
Important:
If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
Product Overview
Figure 21
1.
Hand-grip (2)
10.
Scraper
2.
Auger/impeller lever
11.
Auger
3.
Speed selector lever
12.
Skid (2)
4.
Quick Stick™ discharge
chute control
13.
Electric starter button
5.
Traction lever
14.
Electric starter plug-in
6.
Fuel tank cap
15.
Snow cleanout tool
7.
Engine oil fill tube/dipstick 16.
Headlight
8.
Chute deflector
17.
Wheel clutch lever (2;
models 38634, 38644, and
38654 only)
9.
Discharge chute
Figure 22
1.
Choke
5.
Recoil starter
2.
Ignition switch
6.
Oil drain plug
3.
Fuel shutoff valve
7.
Primer
4.
Throttle
Figure 23
1.
Snow cleanout tool (attached to the handle)
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Filling the Fuel Tank
Gasoline is extremely flammable and explosive.
A fire or explosion from gasoline can burn you
and others.
•
To prevent a static charge from igniting
the gasoline, place the container and/or
snowthrower on the ground before filling,
not in a vehicle or on an object.
•
Fill the tank outdoors when the engine is
cold. Wipe up spills.
•
Do not handle gasoline when smoking or
around an open flame or sparks.
•
Store gasoline in an approved fuel container,
out of the reach of children.
13
Summary of Contents for Power Max 38624
Page 31: ...Notes 31...
