Toro Power Curve 1500, Operator'S Manual

Page: 4 / 8

Setup
Note:
Determine the left and right sides of the appliance from
the normal operating position.
Installing the Upper Handle
1. Remove the handle knobs, oval bolts, and curved washers
from the lower handle (
Figure 1 ).
g013476
Figure 1
1. Handle knob (2) 4. Lower handle
2. Curved washer (2) 5. Upper handle
3. Oval bolt (2)
2. Install the upper handle to the lower handle of the appliance
with the handle knobs, curved washers, and oval bolts as
shown in
Figure 1 .
Note:
Ensure that the power cord attached to the
appliance is routed over the lower handle and to the inside
of the handle assembly.
3. Tighten the handle knobs firmly by hand.
4. Attach the cord guide to the handle ( Figure 2 ).
g287698
Figure 2
1. Cord guide 3. Cord
2. Handle
4