Toro Multi Pro WM 41240, Operator'S Manual

Page: 70 / 84

g028239
Figure 96
1. Bypass fitting 2. Section valve manifold
Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (B of
Figure 97 ).
g027562
Figure 97
1. Valve open 2. Valve closed
2. Remove the 2 endcap-fitting assembies from
each end of the manifold body (
Figure 98 and
Figure 99 ).
g028243
Figure 98
Agitation Valve Manifold
1. Stem retainer 7. Back seating O-ring (0.676
inch / 0.07 inch)
2. Valve stem 8. Valve-seat ring
3. Stem port 9. Mainfold body
4. Stem-capture retainer
10. Ball valve
5. Endcap fitting 11. Endcap-fitting assembly
6. Endcap seal O-ring (0.796
inch / 0.139 inch)
70