12
RUNNING A TEST SYSTEM
To test multiple
Stations
:
1
Select
SYSTEM TEST
or
RUN SINGLE STATION
on the Control Dial.
SINGLE STATION
will
be displayed in the bottom left corner of the
screen.
2
Press and together. The display in
the bot tom left corner will change to
MULTI
STATION
.
3
Press or to select a
Station
to test.
4
Press to move to the
RUN TIME
for the
Station
.
5
Press or to adjust the
Run Time
.
6
Press until the
Station
number is flashing and repeat steps 3 to 5 to program all Stations
to be tested.
7
Press to start the system test.
Each Station with a
Run Time
set will water in sequence, beginning with the one displayed when
was pressed.
Make sure that any valve that you don’t want to test has a runtime of 00min
To stop the test at any time, turn the
Control Dial
to
OFF
.
1
No
RUN TIME
STATION
MIN
MULTI STATION
01
The system may be tested by setting selected stations to water for short times. For example, you might
set
Station
2 to water for 2 minutes, or multiple Stations 1, 2 and 3 to water for 1 minute each
To test a single
Station
:
1
Select
SYSTEM TEST
or
RUN SINGLE STATION
on the
Control Dial
.
SINGLE STATION
will
be displayed in the bottom left corner of the
screen.
2
Press or to select a Station to test.
3
Press to move to the
RUN TIME
for the
Station
.
4
Press or to adjust the
Run Time
.
5
Press to start the system test. Remaining
runtime will be dispalyed on the screen
2
No
RUN TIME
STATION
MIN
SINGLE
STATION
02