Toro HoverPro 450, Operator'S Manual, Page: 6 / 24

2
Installing the Footstop
No Parts Required
Procedure
Secure the footstop to the bolt on the right side of the
lower handle using a nut and 2 washers (
Figure 6 ).
Note:
Install the footstop using the lower hole in the
footstop as shown in Figure 6 .
g027774
Figure 6
1. Footstop 4. Bolt
2. Nut 5. Lower handle
3. Washer
3
Filling the Engine with Oil
No Parts Required
Procedure
Important:
Your machine does not come with oil
in the engine. Before starting the engine, fill the
engine with oil.
Engine Oil Specifications
Engine oil capacity 0.59 L (20 fl oz)
Oil viscosity SAE 10W-30 multigrade
mineral oil
API service classification SJ or higher
1. Move the machine to a level surface.
2. Remove the dipstick by rotating the cap
counterclockwise and pulling it out (
Figure 7 ).
g017332
Figure 7
1. Full 3. Low
2. High
3. Carefully pour about 3/4 of the engine capacity
of oil into the oil-fill tube (
Figure 8 ).
6