Toro HoverPro 400, Operator'S Manual, Page: 12 / 20

Adjusting the Handle
Position
Refer to Figure 15 for the different handle positions.
g025627
Figure 15
1. Hanging storage/transport position 4. Storage/transport position
2. Lower working position 5. Service position
3. Upper working position
Note:
For proper storage procedure, refer to
Preparing the Machine for Storage (page 17) .
Shutting Off the Engine
Service Interval: Before each use or daily
To shut off the engine, release the operator-presence
control (
Figure 16 ).
Important:
When you release the
operator-presence control, the engine
should shut off and the cutting line should stop
within 5 seconds. If they do not stop properly,
stop using your machine immediately and contact
an Authorized Service Dealer.
g017546
g017546
Figure 16
12