Assembling the Blade Spindle (continued)
Note:
A replacement bearing spacer set includes the inner spacer and outer
spacer (items 4 and 5 in
). Do not mix the bearing spacers from one
deck spindle to the another.
IMPORTANT
If new bearings are installed into a used spindle housing, it is not
necessary to replace the original large snap ring. If the original snap
ring is in good condition with no sign of damage (e.g., spun bearing),
leave the snap ring in the housing and discard the snap ring that
comes with the new bearings. If the large snap ring is damaged,
replace the snap ring.
g033718
Figure 223
1.
Bearing
4.
Inner spacer
2.
Spacer ring
5.
Outer spacer
3.
Large snap ring
g033719
Figure 224
1.
Bearing cup
4.
Arbor press
2.
Large snap ring
5.
Support
3.
Outer spacer
6.
Arbor press base
Groundsmaster 7210
Page 7–13
Cutting Deck: Service and Repairs
16222SL Rev C
Summary of Contents for Groundsmaster 7210
