Safety Doors
On each side of the center deck is a safety door that
opens and closes as the wing decks are lowered and
raised (Fig. 13). The doors open to provide overlap of
the cutting blades when the wing units are down. The
doors close to provide safety and protection when the
wing units are raised. Check to make sure the forward,
lower edge of door is even or 6 mm (1/4 in.) higher then
lower edge of door guide when wing decks are in the
fully raised, transport position. If an adjustment to the
door is required, refer to
Adjusting The Safety Door.
Figure 15
1.
Safety door
2.
Door guide
3.
Ball joint
4.
Threaded rod
16
Check for correct operation of the safety doors each
time the deck is cleaned and repair when needed.
CAUTION