10
Check the Engine Oil
Crankcase capacity is 5 liters (5.3 qt) with filter.
1.
Park the machine on a level surface. Release the
hood latch and open the hood.
Figure 1
1.
Hood latch
2.
Remove the dipstick from the tube cap, wipe it
clean and reinstall the dipstick into the tube cap.
Pull it out again and check the oil level on the
dipstick: The oil level must always be in the notch
area on the dipstick.
Figure 2
1.
Dipstick/tube cap
3.
If the oil level is low, remove the tube cap and add
SAE 10W–30 CD oil until the level reaches the top
of notch on the dipstick. DO NOT OVERFILL.
4.
Install the oil tube cap.
5.
Close the hood and secure the latch.
Check the Cooling System
Capacity of the system is 13.2 liters (3.5 gal).
1.
Park the machine on a level surface. Release the
hood latch and open the hood.
2.
Check the coolant level. T
he coolant level should
be up to or above the mounting tabs on the
degasser tank, when the engine is cold.
Figure 3
1.
Degasser tank
3.
If the coolant is low, remove the degasser tank cap
and add a 50/50 mixture of water and Peugeot
recommended anti-freeze (Toro Part No. 93-7213).
Do not use water only or alcohol/ methanol-
based coolants.
IMPORTANT: Do not remove the black plastic
cap on the degasser tank.
4.
Install the degasser tank cap.
5.
Close the hood and secure the latch.
Fill the Fuel Tank
1.
Park the machine on a level surface. Release the
hood latch and open the hood.
2.
Remove the fuel tank cap.
Before Operating
1
1
1
Before servicing or making adjustments to the
machine, stop the engine and remove the key from the
switch
CAUTION