7
Removing the Diode
Parts needed for this procedure:
1
Molded cap
Procedure
For machines with a serial number of 403444961
or below:
1.
Locate the fuse block on the right side of the
machine (
).
g283947
Figure 14
1.
Diode
3.
Fuse block
2.
Fuse-block cover
2.
Access the fuse block by pulling the fuse block
down from the cover (
).
3.
Remove the diode from the fuse block (
) and discard it.
4.
Install the fuse block into the cover.
For machines with a serial number of 403444962
or above:
1.
Remove the molded diode from the connector
labeled P103 on the right side of the machine
(
).
g285043
Figure 15
1.
Diode
3.
Molded plug
2.
Connector—P103
2.
Discard the diode.
3.
Install the molded plug into the connector
(
).
7
Summary of Contents for Groundsmaster 139-1030
Page 11: ...Notes...
Page 12: ......
