Toro Groundsmaster 139-1030, Installation Instructions Manual

Page: 1 / 12

Form No. 3429-577 Rev A
Contactor Kit
Groundsmaster ® 5900 or 5910 Rotary Mower
Model No. 139-1030
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Disconnect the battery.
3
No parts required
–
Remove the side panels.
4
No parts required
–
Remove the 28-V solenoid.
Contactor 1
Contactor mount 1
Cable 1
Nut (1/4 inch) 4
Nut (5/16 inch) 2
Flange bolt 2
5
Carriage bolt
2
Install the contactor.
Wire cap 1
Wire label 1
Vinyl cap 1
Nut (M5) 1
6
Cable tie 1
Remove the I-terminal wire from the
alternator.
7
Molded cap 1 Remove the diode.
8
Fuse (60 A) 1 Install the 60-A fuse.
9
Fuse decal (Part No. 139-1031) 1 Install the decal.
10
No parts required
–
Connect the battery.
11
No parts required
–
Install the side panels and close the
hood.
12
No parts required
–
Verify that the 28-V system and cab
power (if equipped) are functioning.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3429-577* A