![Toro Groundmaster 31900 Service Manual Download Page 136](http://html1.mh-extra.com/html/toro/groundmaster-31900/groundmaster-31900_service-manual_1133559136.webp)
Adjustments
Adjusting the Traction System for Neutral
The traction pedal must return to the N
EUTRAL
position when released from either
the forward or reverse position. The machine must not creep in either direction
on level ground when in the traction pedal is in the N
EUTRAL
position. Adjust the
traction system for neutral as follows:
1. Park the machine on a level surface, lower the cutting unit (or attachment)
and set the key switch to the O
FF
position.
WARNING
Review and follow the
Jacking Instructions (page 1–6)
before lifting
the machine.
2. Raise both front wheels for 2WD machines, or all 4 wheels for 4WD machines
off the floor and support the machine.
3. Loosen the lock nut on the traction (piston) pump adjustment cam.
g301757
Figure 43
1.
Traction (piston) pump
3.
Adjustment cam
2.
Lock nut
4. Start the engine and rotate the cam in either direction until the wheels stop
rotating.
Hydraulic System: Adjustments
Page 5–50
Groundsmaster
®
3200, 3300 and 3310
19240SL Rev A
Summary of Contents for Groundmaster 31900
