General Information
The
Operator’s Manual
provides information regarding the operation, general
maintenance, and maintenance intervals for your GreensPro machine. Refer to
the
Operator’s Manual
for additional information when servicing the machine.
Electrical System
Some of the electrical system components used on GreensPro machines
are part of the Honda engine. These components include the engine
O
N
/O
FF
switch, ignition module, lighting coil, Oil Alert™ unit, and oil level
switch. Service information for these components can be found in the
Honda
Engine Service Manual
. Contact your local Honda Engine Dealer or visit
for assistance.
Service information for the remainder of the electrical system components
used on GreensPro machines can be found in this chapter. The components
include the hour meter, worklight switch, and on machines above serial number
315000000, a seat switch, neutral switch, parking brake switch, resistor
assembly, and interlock module.
IMPORTANT
Before performing any welding on the machine, disconnect the wire
harness ground connector from the engine to prevent damage to
the machine electrical system.
Electrical System: General Information
Page 6–2
GreensPro
™
1240/1260
14211SL Rev A
Summary of Contents for GreensPro 1240
Page 4: ...Reader Comments Page 4 GreensPro 1240 1260 14211SL Rev A...
Page 8: ...Preface Page 8 GreensPro 1240 1260 14211SL Rev A...
Page 14: ...Safety Safety and Instructional Decals Page 1 6 GreensPro 1240 1260 14211SL Rev A...
Page 30: ...Specifications and Maintenance Special Tools Page 2 16 GreensPro 1240 1260 14211SL Rev A...
