7.
Tighten the nut on the throttle spring until the
spring is fully compressed, then back off 1/2 turn
(
).
Important:
When operating at high idle the
throttle lever should not move; if it moves,
tighten the nut on the throttle spring slightly.
g274739
Figure 12
1.
Bolt
5.
Friction washer
2.
Flat washer
6.
Throttle spring
3.
Friction washer
7.
Nut
4.
Throttle lever
8.
Attach the engine to the gearbox using the
previously removed nuts (
).
9.
Tighten all of the engine mounting fasteners.
10