Steering Arm Assembly
g284711
Figure 136
1.
Flange nut
12.
Hex nut
23.
Gas cylinder
2.
Spacer
13.
Screw
24.
Jam nut
3.
Cap screw
14.
Cap
25.
Retaining ring
4.
Flat washer
15.
Washer
26.
Bushing
5.
Speed nut (6 each)
16.
Steering wheel
27.
Retaining ring
6.
Steering mount
17.
Set screw (2 each)
28.
Flange head screw (3 each)
7.
Steering arm
18.
Flange head screw (4 each)
29.
Platform support – RH
8.
Flange head screw (2 each)
19.
Steering input device
30.
Pivot lever
9.
Button head screw (6 each)
20.
Lock nut (4 each)
31.
Flange bushing
10.
Roll pin
21.
Cover
32.
Pivot pedal
11.
Shaft adapter
22.
Carriage bolt
33.
Pedal pad
If the steering input device is replaced, the steering system – center must be
calibrated; refer to
Calibrating the Steering System – Center (page 5–91)
.
For steering input device testing information; refer to
.
Removing the Steering Arm
Refer to
for this procedure.
Greensmaster® eTriFlex 3360 and 3370
Page 6–35
Chassis: Service and Repairs
19239SL Rev B
