Toro Greensmaster eFlex 2120 04046, Operator'S Manual, Page: 8 / 48

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
Target plate 1 Install the target plate.
2
No parts required
–
Prepare the traction unit (optional).
3
Bolt (3/8 x 3/4 inch) 2 Install the cutting unit to the traction unit.
Handle retainer 2
4
Hairpin cotter 2
Install the handle retainers.
Battery pack 1
Bolt (5/16 x 1/2 inch)
6
5
Washer 6
Install the battery pack.
6
No parts required
–
Adjust the EZ-Turn sensor.
7
Transport wheels—Transport Wheel Kit
(Model No. 04123 [Optional])
2 Install the transport wheels.
8
Production-year decal 1 Install the production-year decal
9
Grass basket 1 Install the grass basket.
10
No parts required
–
Break in the machine.
Media and Additional Parts
Description Qty. Use
Operator's Manual 1
Certificate of Compliance
1
Read or view these materials before operating the
machine.
Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
To install the weight rod onto your machine,
refer to the installation instructions in your cutting unit
Operator’s Manual .
8