Servicing the Cutting Unit Assembly
g206897
Figure 179
1.
Cutting unit
3.
Bearing (2 each)
5.
Reel driveshaft (left-hand threads)
2.
Flocked seal (2 each)
4.
Bearing lock screw (right-hand
threads)
Disassembling the Cutting Unit
IMPORTANT
When removing the reel driveshaft (item 5 in
), use
appropriate wrench or socket on 1 inch hex surface of shaft. Do
not use 1/2 inch extension on the end of the reel driveshaft when
loosening or tightening the driveshaft. The 1/2 inch hex is intended
for backlapping only.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 7–31
Cutting Unit: Service and Repairs
12189SL Rev E
