– Do not operate close to sand traps, ditches,
creeks, or other hazards.
– Reduce speed when making sharp turns. Avoid
sudden stops and starts.
– When near or crossing roads, always yield the
right-of-way.
– Reduce engine speed and apply the service brake
when going downhill to keep forward speed slow
and to maintain control of the machine.
•
The grass basket must be in place during the mowing
operation for maximum safety. Shut the engine off
before emptying the basket.
•
Do not touch the engine, muffler, or exhaust pipe
while the engine is running or soon after it has
stopped because these areas could be hot enough
to cause burns.
•
When a person or pet appears unexpectedly in or
near the mowing area,
stop mowing
. Careless
operation, combined with terrain angles, ricochets,
or improperly positioned guards can lead to thrown
object injuries. Do not resume mowing until the
area is cleared.
Maintenance and Storage
•
Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
•
If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting unit,
attachments, and any moving parts. Keep everyone
away.
•
To ensure safety and accuracy, have an Authorized
Toro Distributor check the maximum engine speed
with a tachometer. Maximum governed engine speed
should be 3600 ±100 RPM.
•
If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
•
Use only Toro-approved attachments and
replacement parts. The warranty may be voided if
used with unapproved attachments.
Sound Pressure
This unit has a maximum sound pressure level at the
operator’s ear of 84 dBA, based on measurements of
identical machines per EN 836 and ISO 11201.
Sound Power
This unit has a guaranteed sound power level of 95 dBA,
based on measurements of identical machines per ISO
11094.
Vibration (Model 04034)
This unit does not exceed a hand/arm vibration level of
7.00 m/s
2
, based on measurements of identical machines
per EN 1033 and EN 836.
Vibration (Model 04035)
This unit does not exceed a hand/arm vibration level of
4.50 m/s
2
, based on measurements of identical machines
per EN 1033 and EN 836.
6
Summary of Contents for GREENSMASTER 1000
Page 34: ...Notes 34...
Page 35: ...Notes 35...
