Toro GrandStand TURBO FORCE 74513, Operator'S Manual

Page: 16 / 60

Operating the Throttle
You can move the throttle control between F
AST
and
S
LOW
positions ( Figure 12 ).
Always use the F
AST
position when engaging the PTO.
g008946
Figure 12
Operating the Ignition
Switch
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
g031239
Figure 13
g031281
Figure 14
Starting the Engine
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
g031504
Figure 15
16